金沙总站

Hello, welcome to Dongguan Styler Laser Intelligent Technology Co., Ltd.!
中文    EN

Contact us

Dongguan Styler Laser Intelligent Technology Co., Ltd.
Tel: 13580722659  
Fax: 0769-81306766  
Email: sales@styler.com.cn  
Website: www.styler.com.cn  
Address: Building D, No. 81, Huahong Commercial East Street, Zhenxing North Road, Gaopo Town, Dongguan City, Guangdong Province  

Precautions for operation of optical fiber laser welding machine

Publisher: Administrator Date:2021-11-11

Optical fiber Operation of laser welding machine matters needing attention

In the process of using any equipment, we should pay attention to the basic operation in order to better use the equipment, especially some equipment with advanced skills. With the continuous application of scientific and technological skills, the current Laser welding machine The equipment can meet the production and application requirements of different categories. Through such welding skills, the traditional welding concept is broken. Moreover, in the practical application and operation, the method is simple, the welding quality is reliable, and the interference of manual operation is reduced, so that the welding quality has been gradually improved, and has played a very important role in the production and manufacturing category.

Laser professional active welding equipment manufacturers have many years of successful experience in the active development of laser welding. It is a trend for fiber laser welding machines to configure laser welding machine fixtures to realize the active production of hardware products or accessories, which not only saves labor, but also greatly improves the production capacity.

At this stage, there is a great demand for laser welding machines in manufacturing industry, automobile industry and glasses industry. Then, how much do you know about the common faults and problems of laser welding machine that can be solved by some common skill parameter debugging in the operation process of laser welding machine? In the following, the laser has sorted out how to correctly use the laser welding machine, so that the laser welding machine can adhere to good processing efficiency   As a result, it brings us standardized production.

    Laser welding robot The price of parts and components is expensive. Due to the limitation of the skill level of parts and components in the key center of China's industrial robots, the primary parts and components of laser welding robots are imported, which leads to the high price of parts and components of domestic welding robots. The four central parts of industrial robots are reducer, servo motor Once the servo drive and controller are damaged, tens of thousands or even hundreds of thousands of replacement costs are often incurred. For example, the price of welding gun, gun cable and wire feeder with high damage rate is also about 10000, which makes many enterprises can afford to buy welding robots but can't afford to use them, which seriously prevents the pace of "machine replacement" in China and the development of Intelligent Manufacturing in China.

At present, the operator should pay attention to its operation process and process in the process of operating the laser welding machine, and be able to debug according to specific methods. Different specially required data or welding process may lead to different equipment operation conditions, which should be paid attention to. The operator shall have clear operation direction and process in the process of commissioning and operation.

In the process of operating the laser welding machine, because it has a special operation principle, the relevant requirements and specifications that should be paid attention to during operation should be operated according to the practical specifications, which is conducive to prolonging the service life of the equipment in the actual application process. In addition, operators should pay attention to some daily maintenance operations, and have a more in-depth understanding of the operation details of these laser welding machines.

This greatly prolongs the production cycle of new products, and then reduces the competitiveness of enterprises. After the relative position between the industrial robot and the welding workpiece changes, the robot laser welding machine programming is mainly to control the walking path of the manipulator through the teaching pendant. When the end of the welding gun reaches the specified point, add the corresponding action command to call the program, residence time, air supply, wire feed, wire take-up, arc striking, arc extinguishing, rotation, etc, The specified point is generally determined with reference to the welding workpiece on the positioner or welding tooling. The original imported fiber laser and high-speed galvanometer scanning system are selected, with stable output power, good optical mode and excellent beam quality.

金沙总站



Dongguan Styler Laser Intelligent Technology Co., Ltd.
One stop laser welding solution Servicer
Contact us:
  Tel: 13580722659  
  Fax: 0769-81306766  
  Email: sales@styler.com.cn  
  Website: www.styler.com.cn  
  Address: Building D, No. 81, Huahong Commercial East Street, Zhenxing North Road, Gaopo Town, Dongguan City, Guangdong Province  

CopyRight ? 2021 Dongguan Styler Laser Intelligent Technology Co., Ltd. All Right Reserved.
粤ICP备19159359号

Online
Service

ConsultationTime:9:00-18:00

Select customer service:

  • QQ客服
  • QQ客服
  • QQ客服

Hot
Line

13580722659
7*24H Service

Follow
Us

Website
TOP
XML 地图 | Sitemap 地图